INSTRUMENT FOR LOAD TESTS AND FLEXURAL BREAKAGE MODULE MOR / 5-TS series
Increased capacity for thick tiles with high breaking loads. Also suitable for raw or dried materials without the use of any additional accessories Compliant with UNI EN ISO 10545-4. Various models available for different formats.
Standardized systems for crazing resistance tests on ceramic glazed tiles.
UNI EN ISO 10545-11 standard
System designed to subject whole tiles to high pressure water vapor in an autoclave.
Tiles on which the presence of crazing will be verified by laboratory tests.
In stainless steel.
Power supply 400 V, 50 Hz.
Automatic test cycle.
Available autoclaves of different sizes and applied pressure.
Oven equipped with different firing zones with different temperatures (thermal gradient), which follow the same firing cycle.
Features:
- Temperature uniformity within each of the 6 cells of approximately +/- 2 / 2.5 ° C;
- Possibility of setting and managing minimum gradients of 10 ° C and maximum of 60 ° C between cell and cell
- Possibility of carrying out rapid cycles with times of reaching the maximum temperature of +/- 20 minutes and a maximum of 5 hours.
- Possibility to program the cooling (optional)
- Management of the cooking cycle entrusted to a computer equipped with a touch screen
- Possibility of filing the results obtained in the various cells during the thermal cycles; test date and material tested
- Possibility of firing samples with a maximum size of 40 x 80 mm.
Instruments for measuring the conductivity of liquids.
Various models available.
Airbrush used for the spray application of glazes and colors in the ceramic laboratory.
With nylon tank.
Perfect complement to our spray booths.