3-ANGLE GLOSSMETER
The 3-ANGLE professional portable glossimeter offers a complete solution for any application and need for measuring surface gloss. Instrument used to measure the degree of gloss of surfaces, it can be used for measurements applied to paints, inks, coatings, marble, granite, vitrified polished tiles, ceramics, bricks, porcelain and much more. The 3 detection geometries, 20 °, 60 ° and 85 ° respectively, allow maximum ductility of use, including low, medium and high gloss surfaces.
Standardized systems for crazing resistance tests on ceramic glazed tiles.
UNI EN ISO 10545-11 standard
System designed to subject whole tiles to high pressure water vapor in an autoclave.
Tiles on which the presence of crazing will be verified by laboratory tests.
In stainless steel.
Power supply 400 V, 50 Hz.
Automatic test cycle.
Available autoclaves of different sizes and applied pressure.
Oven equipped with different firing zones with different temperatures (thermal gradient), which follow the same firing cycle.
Features:
- Equipped with 6 independent heating cells;
- Possibility of setting and managing gradients of up to 15 ° C between cell and cell
- Possibility of carrying out rapid cycles with times of reaching the maximum temperature from a minimum of 60 minutes to a maximum of 180 minutes.
- Possibility to manage the oven even from a distance.
- Firing area size 150x600x110 mm
Oven equipped with different firing zones with different temperatures (thermal gradient), which follow the same firing cycle.
Features:
- Temperature uniformity within each of the 6 cells of approximately +/- 2 / 2.5 ° C;
- Possibility of setting and managing minimum gradients of 10 ° C and maximum of 60 ° C between cell and cell
- Possibility of carrying out rapid cycles with times of reaching the maximum temperature of +/- 20 minutes and a maximum of 5 hours.
- Possibility to program the cooling (optional)
- Management of the cooking cycle entrusted to a computer equipped with a touch screen
- Possibility of filing the results obtained in the various cells during the thermal cycles; test date and material tested
- Possibility of firing samples with a maximum size of 40 x 80 mm.
Mechanical shaft stirrer with LED display.
Maximum stirring rate of 20 Litres.
Agitation rate adjustable from 50 to 2,200 rpm with a power of 50W.
Overheating motor overload indicator light.
Upper passage hole for stirring rods.
Supplied complete with steel spindle and relative key.
Degree of protection IP 42. 220V power supply.