Skip links

METROLOGY SERIES LARGE SHEET METERS

Continuous measurement scanning instrument, detects measurement data every 0.01 mm, sending them to the PLC to analyze any type of tile defect. With the three-dimensional METROLOGY tool, it can check:

  • Sides size
  • Orthogonality
  • Straightness of the edges
  • Sides parallelism
  • Diagonal
  • Tile thickness
  • Tile flatness
With this instrument it is not necessary to have dedicated calibration plates. METROLOGY, is available on a horizontal plane. Technical features: – 7 “touch screen display – Instrument resolution ± 0.01 mm – General tool resolution 0.025 (error maximum) – Type of measurement: with contact probe Available in various models for different sizes, up to 1800×3600 mm Fully automatic versions available on request (except loading).  

Name

Composed of.

Racla (presser) with handle

Red polyurethane with wooden handle

Racla (preemaker) with handle

Natural red rubber with wooden handle

Racla (preemaker) with handle

Red polyurethane with aluminum handle

Racla (preemaker) with handle

Natural red rubber with aluminum handle

Availability of other types of polyurethane in different hardnesses and also three-ply

Oven equipped with different firing zones with different temperatures (thermal gradient), which follow the same firing cycle.

Features:

  • Temperature uniformity within each of the 6 cells of approximately +/- 2 / 2.5 ° C;
  • Possibility of setting and managing minimum gradients of 10 ° C and maximum of 60 ° C between cell and cell
  • Possibility of carrying out rapid cycles with times of reaching the maximum temperature of +/- 20 minutes and a maximum of 5 hours.
  • Possibility to program the cooling (optional)
  • Management of the cooking cycle entrusted to a computer equipped with a touch screen
  • Possibility of filing the results obtained in the various cells during the thermal cycles; test date and material tested
  • Possibility of firing samples with a maximum size of 40 x 80 mm.

 

Instruments for measuring the conductivity of liquids.

Various models available.

The PEIBOX/B is the perfect booth to view the specimens abraded according to the PEI method, compliant with the ASTM C1027-99 and UNI EN ISO 10545-7 standards.

The instrument is supplied with the intensity of regulation adjusted in accordance with the standard.

Perfect complement to our AP-18PEI100-300 and PEI3 abrasive meters.