Skip links

HYDRAULIC LABORATORY PRESSES Mod. MIGNON S and MIGNON SS

Laboratory press consisting of a compact structure. Hydraulic operation for production of samples in the laboratory. The pressing force is electronically adjustable and verifiable from the appropriate display. It allows the programming of three different thicknesses of soft at the same time. Three versions available, from 80, 110 and 125 Tons and with different functions and software controls. Possibility of mounting different interchangeable molds (100×100-150×150-100x200mm)    

Oven equipped with different firing zones with different temperatures (thermal gradient), which follow the same firing cycle.

Features:

  • Equipped with 6 independent heating cells;
  • Possibility of setting and managing gradients of up to 15 ° C between cell and cell
  • Possibility of carrying out rapid cycles with times of reaching the maximum temperature from a minimum of 60 minutes to a maximum of 180 minutes.
  • Possibility to manage the oven even from a distance.
  • Firing area size 150x600x110 mm

 

Oven equipped with different firing zones with different temperatures (thermal gradient), which follow the same firing cycle.

Features:

  • Temperature uniformity within each of the 6 cells of approximately +/- 2 / 2.5 ° C;
  • Possibility of setting and managing minimum gradients of 10 ° C and maximum of 60 ° C between cell and cell
  • Possibility of carrying out rapid cycles with times of reaching the maximum temperature of +/- 20 minutes and a maximum of 5 hours.
  • Possibility to program the cooling (optional)
  • Management of the cooking cycle entrusted to a computer equipped with a touch screen
  • Possibility of filing the results obtained in the various cells during the thermal cycles; test date and material tested
  • Possibility of firing samples with a maximum size of 40 x 80 mm.

 

Various models with different accuracy and range.

Common features:

– Automatic tare over the entire range.

– Serial RS232 interface as standard.

– Filters for weighing in particular conditions and for dosing

– Selectable measurement units.

– LCD display with backlight.

– Operation with external power supply or internal rechargeable battery both supplied.

 

Power supply 230V 50/60 Hz

PEI abrasion meter, for determining the abrasion resistance of ceramic glazed surfaces

Suitable for carrying out tests according to the P.E.I. (wet). UNI EN ISO 10545-7 standard.

Rotating units with digital electronic pre-selection pulse counter adjustment, with LED display.

Electronics with inverter for precise regulation of the number of revolutions.

Model with 1 test group.

Model with 3 test groups.

For a professional view of the test result, we recommend the combination with the PEIBOX/B cabin.