Skip links

Sorry, but this article is only available in English.

Electric furnaces used in the thermal processes of the metallurgical, chemical, dental and ceramic laboratory.

The combination of lightened plates, resistances mounted on glow plugs and the use of preformed ceramic fibers, allow these ovens to rise in temperature quickly and cool down just as quickly, so as to offer the greatest advantages in intermittent work.

Equipped with a K1P programmer with which it is possible to set 4 cooking cycles each consisting of 8 steps.

Models LKN74, LKN75, LKN76, LKN84, LKN85 and LKN86 equipped with wire resistors.

LKN77 and LKN87 models equipped with “silicon carbide” elements.

Models LKN78, LKN79, LKN80, LKN88, LKN89 and LKN90 with resistors consisting of elements in “silicide molybdenum”

Various models available (firing area dimensions and maximum temperature).

 

Laboratory ovens suitable for cooking with rapid cycles.

The temperature and cooking cycle are controlled by a microprocessor programmer mod. K1PX with which it is possible to set 4 cooking cycles composed, each, of 8 STEPS.

Optional: Indirect forced cooling with automatic chimney control included

Optional: Direct forced cooling with automatic chimney control included

Optional: Automatic chimney management

Optional: Automatic management of the controlled atmosphere

Optional: Automatic vacuum management (Vacuum pump included)

Optional: PC management software (PC excluded)

Various models available (firing zone size and maximum temperature).

The oven consists of a sturdy steel structure which encloses the thermal insulation consisting of bricks low density refractories and preformed fiber sheets highly temperature and shock resistant ceramic thermal.

The oven comprises zones having different characteristics and precisely:

  • smoke entry and evacuation area
  • preheating area
  • cooking zone
  • cooling zone

In all models the heating elements in the cooking zone are in Silicon Carbide allowing these furnaces to be able to operate up to a maximum temperature of 1330 ° C

Optional: Management of the oven using a PC

Various models available (maximum sample size and number of zones).

Laboratory drawer kiln for drying tiles, raw materials, glazes and colors.

 

DESCRIPTION AND TECHNICAL FEATURES
– Painted steel structure
– Equipped with 5 or 7 drawers with stainless steel interior
– Useful inside of drawers : cm. 85×140 (also available in version with useful drawers cm. 70×75)
– Maximum temperature of use : 120°C
– Thermoregulator with digital display
– Models with 5 or 6 drawers , equipped with normal feet or movable wheels

Code

KILN DRYER FOR

CERAMIC LABORATORY

Number of drawers

and useful inside cm.

External dimensions cm.

ARCDRYCER7

DRYCER 7

7 (85×140)

162x100xH120

ARCDRYCER7CR

DRYCER 7-W

7 (85×140)

162x100xH120

ARCDRYCER5

DRYCER 5

5 (85×140)

162x100xH120

ARCDRYCER5CR

DRYCER 5-W

5 (85×140)

162x100xH120

(5-W and 7-W models are equipped with wheels)