Skip links

ALUMINUM AND IRON FRAMES

Frames made of aluminum and iron in different sizes and with different profiles (normal and “German type”).    

Seedex photoexposer is a three-function machine for drying and exposing screen printing frames.

 

MACHINE’S DESCRIPTION AND CHARACTERISTICS:

Painted steel structure

The machine is equipped with a dryer with drawers located in the bottom part of the machine, with a pneumatic press in the central part, and a halogen lamp located in the upper part.

The Pneumatic press is available in 2 versions:

manual opening (model TC) and

automatic opening (model TC-A);

Dryer with 3 drawers sliding on bearings to dry photosensitive emulsion before exposure,

Completed with a UV ray protection system consisting of a rigid casing with a self-winding front curtain and sliding side panels for inspection.

The control panel consists of a 29 channel digital computer that can control and store exposure times, vacuum times, and the drying kiln temperature and display the number of hours the bulb has been operating in order to monitor its lifetime.

Exposure compensating light with photocell

A vacuum meter is installed on the control panel that allows the pressure control in the vacuum table

The cooling system include preventing overheating of electrical components

Metal-halogen lamp in 2 versions: 2000/5000 W or 3500/7000 W

 

POWER SUPPLY

400 V – 50 Hz (3 phases + earth) – 10000 W, with variations possible on request

 

RECOMMENDED SPARE PARTS

halogen bulb 5000 or 7000 W depending on the models

rubber mat with a sealed edge sized to the pneumatic press

CODE

NUMBER

PHOTOEXPOSER

TC

(MANUAL PNEUMATIC PRESS OPENING)

GLASS SIZE

CM.

USEFUL SIZE

CM.

OVERALL DIMENSION

CM.

AQSFOTTC1

PHOTOEXPOSER TC 1

90X110

70X95

150X130X260 H

AQSFOTTC2

PHOTOEXPOSER TC 2

123X153

100X135

190X165X260 H

AQSFOTTC3

PHOTOEXPOSER TC 3

143X173

120X155

210X180X260 H

AQSFOTTC4

PHOTOEXPOSER TC 4

160X200

140X180

235X195X260 H

AQSFOTTC5

PHOTOEXPOSER TC 5

140X220

120X200

258X178X300 H

CODE

NUMBER

PHOTOEXPOSER

TC-A

(AUTOMATIC PNEUMATIC PRESS OPENING)

GLASS SIZE

CM.

USEFUL SIZE

CM.

OVERALL DIMENSION

CM.

AQSFOTTCA1

PHOTOEXPOSER TC-A1

90X110

70X95

150X130X260 H

AQSFOTTCA2

PHOTOEXPOSER TC-A2

123X153

100X135

190X165X260 H

AQSFOTTCA3

PHOTOEXPOSER TC-A3

143X173

120X155

210X180X260 H

AQSFOTTCA4

PHOTOEXPOSER TC-A4

160X200

140X180

235X195X260 H

AQSFOTTCA5

PHOTOEXPOSER TC-A5

140X220

120X200

258X178X300 H

 

 

Made by painted stainless steel, with manual closing clamps.
All movements are effected by 2 driving handwheels plus the beam’s one;
Complete of n ° 3 pression bars and all accessories.
The TME “multistretcher” is a mesh tensioning unit for the professionals.
It allows stretching mesh on many frames of different formats and profiles at the same time.
The waste of mesh is minimized and the most economical production is guaranteed.

The frames can be stretched straight or at any angle with synthetic mesh, metallised polyester as well as stainless steel mesh to produce reproducible stencils for all printing purposes.

Due to the handwheels and beam movements of all 3 sides, a parallel, even mesh tension of warp and weft is guaranteed; the uniform stretching over the entire area is maintained by the clamps on all three sides which are riding independently on roller bearings.

Frame contact with the mesh again is manually driven for easy handling.

CODE NAME MODEL USEFUL FRAME SIZE CM. OVERALL DIMENSION CM.
AQSTME1330PM MANUAL STRETCHING MACHINE TME 130X300

130X300

390X186XH112

AQSTME1630PM

MANUAL STRETCHING MACHINE

TME 160X300

160X300

 390X216XH112

AQSTME1830PM

MANUAL STRETCHING MACHINE

TME 180X300

180X300

 390X236XH112

AQSTME2030PM

MANUAL STRETCHING MACHINE

TME 200X300

200X300

 390X256XH112

 

 

Used for manual development of flat and rotary printing screens. Using its powerful jet of water is possible to remove the exceeding emulsion after having applied the product STRIPPER.

CHARACTERISTICS OF USE

The Blue Clean pump is used in combination with PVC TANK FOR DEVELOPMENT;

Blue Clean features a 3 piston pump with a pressure of 120 bar and a 1.5 HP silenced engine.

POWER SUPPLY 220 volts – 50 Hz Consumption 2.5 Kw

 

 

CODE

NAME

MODEL

AQSPBC620AR

BLUE CLEAN PUMP

620 AR

 

A solution developed for automatic processing and washing of all kinds of flat screens after the exposure step. It allows a perfect screen opening so it is possible to obtain very high constancy and quality of the finished frame.

 

TECHNICAL CHARACTERISTICS

Completely stainless steel made. Provided with recycling device with filters which cut down the water consumption and allow to reuse the recycled water for the development of the screens. An electric control panel is used to set all the programs for automatic development and washing cycles.

 

AVAILABLE MODELS

S-VA Standard Model

S-VAD Model with locking doors

CODE

NAME

MODEL

USEFUL SIZE CM.

OVERALL DIMENSIONS CM.

AQSSVA1216

AUTOMATIC DEVELOPING MACHINE

S-VA 1216

120X160

160X70X250 H.

AQSVAD1216

AUTOMATIC DEVELOPING MACHINE

S-VAD 1216

120X160

160X70X250 H.